HD-RX-101-C-1G-E-B-T

DM Lite – HDMI® over CATx Receiver, Wall Plate, Black Textured

Pairs with a DM Lite transmitter to provide a simple point-to-point signal extender for HDMI® signals up to UHD and 4K.

카테고리:

The HD-RX-101-C-1G-E-B-T is a wall plate DM Lite receiver designed to pair with a DM Lite transmitter to form a point-to-point signal extender for HDMI® signals. The DM Lite family of products offers a very simple and versatile solution for extending HD, UHD, 2K, and 4K video signals, with stereo or surround sound audio, over a single CAT5e (or better) cable. A cable length of up to 230 ft (70 m) is supported for HD 1080p, WUXGA, and 2K signals, or up to 130 ft (40 m) for UHD and 4K.[1]

For applications requiring a surface mount version, refer to the HD-RX-101-C-E.
For applications that require IR or RS-232 signal extension, refer to the HD-RXC-101-C-1G-E-B-T.

The HD-RX-101-C-1G-E-B-T is designed to mount in a single-gang electrical box or plaster ring (not included). It is normally powered by the transmitter over the link cable when using a surface mount transmitter. If using a wall plate transmitter, a single power pack must be purchased (sold separately, model TBA), which may be connected to either the receiver or transmitter.[2]

Important: This product is not addressable from a control system and offers no programmable functionality. AV and CEC signals are simply passed through between a single transmitter and receiver pair. The RJ45 link port on this product is exclusively intended for linking with a single DM Lite transmitter. It should not be used to connect to any other equipment or network. DM Lite is not compatible with PoE, PoDM, DigitalMedia 8G+® (DM 8G+®), or HDBaseT®.

 

Key Features
  • Pairs with a DM Lite transmitter to provide a simple point-to-point signal extender
  • Enables extension of HDMI® video and audio signals
  • Links to the transmitter via a single CAT5e (or better) twisted pair cable [1]
  • Supports 4K and UHD at up to 130 ft (40 m)
  • Supports HD 1080p, WUXGA, and 2K at up to 230 ft (70 m)
  • Handles 4K video resolutions up to 4K60 4:2:0 and 4K30 4:4:4
  • Handles 3D video and Deep Color
  • Supports Dolby® TrueHD, Dolby Atmos®, DTS HD®, DTS:X®, and uncompressed 7.1 linear PCM audio
  • Compatible with HDMI and DVI display devices[3]
  • HDCP 2.2 compliant
  • Passes CEC and EDID signals
  • Flush wall mount design
  • Installs in a single-gang U.S. electrical box (2-1/4” deep) or plaster ring
  • Decorator style faceplates sold separately
  • Normally powered by the transmitter (surface mount) over the link cable[2]
  • Universal 100-240V power pack available separately (coming soon) for use with a wall plate transmitter[2]
Video
Output Signal TypeHDMI w/Deep Color, 3D, & 4K (DVI compatible [3])
Copy ProtectionHDCP 2.2

Maximum Resolutions

Scan
Type
ResolutionFrame
Rate
Color
Sampling
Color
Depth
Progressive4096×2160 DCI 4K
&
3840×2160 4K UHD
24 Hz4:4:430 bit
30 Hz4:4:424 bit
30 Hz4:2:236 bit
60 Hz4:2:024 bit
2560×1600 WQXGA60 Hz4:4:436 bit
1920×1080 HD 1080p60 Hz4:4:436 bit
Interlaced1920×1080 HD 1080i30 Hz4:4:436 bit


NOTE: Common resolutions are shown; other custom resolutions are supported at pixel clock rates up to 300 MHz

Audio
Output Signal TypeHDMI
FormatsDolby Digital®, Dolby Digital EX, Dolby Digital Plus, Dolby TrueHD, Dolby Atmos, DTS®, DTS ES, DTS 96/24, DTS HD High Res, DTS-HD Master Audio, DTS:X, LPCM up to 8 channels
Communications
HDMIHDCP 2.2, EDID, CEC pass-through
DM Lite LinkProprietary link for connection between one DM Lite TX & RX only
Connectors
HDMI OUT(1) HDMI Type A connector, female;
HDMI digital video/audio output (DVI compatible [3])

FROM TX (rear)

(1) 8-pin RJ45 connector, female, shielded;
Link port for connection to a DM Lite transmitter [1]
24VDC 1.25A (rear)(1) 2-pin 3.5 mm detachable terminal block;
24 Volt DC power input;
Power pack sold separately (if required, model TBA) [2];
Note: This connection powers both the receiver and transmitter; this connection is not normally used when pairing with a surface mount transmitter.[2]
Indicators
PWR(1) Green LED, indicates operating power is supplied from the TX via the DM Lite link or from a power pack via the 24VDC input
HDMI OUT(1) Green LED, indicates HDMI output signal presence
FROM TX(2) LEDs (on RJ45 connector), green LED indicates link status, amber LED indicates a valid video signal
Power
Power Pack (sold separately)Input: 100-240 Volts AC, 50/60 Hz;
Output: 1.25 Amps @ 24 Volts DC;
Model: TBA
Note: This power pack is only required when pairing with a wall plate transmitter. When pairing with a surface mount transmitter, use the power pack supplied with that transmitter. The receiver and transmitter are powered together using a single power pack connected at either the receiver or transmitter (not both).[2]
Environmental
Temperature32° to 104° F (0° to 40° C)
Humidity20% to 90% RH (non-condensing)
Construction
CompositionMetal housing and bracket with black polycarbonate front label overlay
MountingMounts in a 1-gang (or larger) 2-1/4 inch (57 mm) deep U.S. electrical box or plaster ring (not included)
FaceplateRequires a decorator-style faceplate (FP-G series, sold separately)
Dimensions
Height4.08 in (104 mm)
Width1.81 in (46 mm)
Depth1.97 in (50 mm)
Weight
5.22 oz (148 g)
Compliance
UL Listed for US & Canada, CE, IC, FCC Part 15 Class B digital device
Maximum DM Lite Link Cable Lengths
 
 
Resolution
Cable Type
CAT5e (or better),
DM-CBL-ULTRA DM® Ultra Cable, or
DM-CBL-8G DM 8G DM 8G® Cable [1]
1920×1080 FHD 1080p230 ft (70 m)
1920×1200 WUXGA
1600×1200 UXGA
2048×1080 DCI 2K
2048×1152 QWXGA
2560×1080 UWFHD130 ft (40 m)
2560×1440 WQHD
2560×1600 WQXGA
3840×2160 4K UHD
4096×2160 DCI 4K